Guest
Building hydraulic wood splitter from scratch. Fabricating the press slide that connects to the hydraulic cylinder rod and presses logs through the 2-,4- or 6-way wedge (still need to be fabricated). This slide consists of mild steel and Hardox steel. Hardox is used on the bottom retainer strips that keep the slide on the edges on the splitter body. Drilling the holes was surprisingly easy, however, the last three holes were a nightmare dulling the drill bits faster I could sharpen them. The rest of the slide is made of mild steel and equipped with grease fittings in strategic places to keep the slide greased up and in good shape. The edges welded to the body are also made from Hardox and I welded them in small 5 cm/2“ increments and cooled the work piece down regularly to keep the warping to minimal. I placed the dedicated log splitter spool valve on top of the cylinder but this placement may change due to user ergonomics which I can only test while actually using the splitter. Then there's the Audi
