Guest
This video is about Flushing transmission without using pump, less than 10 minutes Complete transmission, oil flush for any car Easy way to complete transmission fluid change (Flush) in 10 mints without using any pump Procedure 1. drain from transmission pan cap it with 3.5 liter new ATF OIL 3. disconnect the outlet hose of transmission oil cooler and connect it to tube and put the other end in a gallon 4. start the till comes out and then stop the engine 5. Refill it with same amount ATFthat came out recently and check the level,it should be at cold (C) area the engine on and let it get worm to operating temperature and shift the gears to all positions then check the level, it should be at hot (H) area, if it wasn't, fill it up till it gets there Car been working on: TOYOTA Camry 2011 ATF type: ATF IV: ATF4 🔔 Hit the bell next to Subscribe so you don't miss a video! 👨🏻💻 W
