Guest
Hydrogen generator. This video is a brief overview of one of my hydrogen generators. This Hydrogen Generator consists of 9 316l stainless steel plates. I did some small tests with a 12 V battery and I indicated in the video how many amps it consumes. Water electrolysis has become a passion for me. I managed to sprint a torch For the electrolyte I used distilled water and potassium hydroxide and I got a good electrolysis. I used a flake of potassium hydroxide to a liter of water. You can find videos with this generator at the following links: It can be used with green energy or from an alternator or a car battery to be mounted in order to save fuel. Or for a bicycle or an engine. It is a wet cell of hho. This complete hho kit contains 9 316l stainless steel plates. The 316L stainless steel plates are 1 mm thick. For water electrolysis I used 12 V current from a battery Thank you very much for your support and please keep doing it: #SaveFuel #HydrogenGenerator #MakeWaterElectrolysis It is a hydrogen generator made of 9 316L stainless steel plates. The stainless steel plates have the size of 150X150 and 1 mm thickness. I modified the contacts of the plates, obtaining electrolysis with only 7 amps. I managed to light a small constant flame with the gas produced by electrolysis, oxygen and hydrogen. Of course I also used a directional valve for the safety of the hydrogen generator. Flash Back Arrestor is used for acetylene and propane, it works very well for hydrogen. because it is a small amount of hydrogen and no pressure is applied at all, an oxygen safety valve can be used As electrolyte I used distilled water and potassium hydroxide in a very small amount. The power source I used was a car battery. I didn't use an amp regulator, pwm The changes made to this hydrogen generator do not stop here, in the future in the next experiment I think I will make it from 13 plates. This change turned out well. expectations for new experiments are rising
