Guest
Welcome to the C01 unboxing video. 1. Take out the top release film accessory. 2. Gently remove the UV-protective outer cover. 3. Retrieve the accessory pack and the power cord. 4. Remove the support foam for the outer cover. 5. Install the outer cover vertically downwards. 6. Take out the four fixing screws and the Allen wrench from the toolkit. 7. After installing in sequence, check if the opening and closing functions are working properly. 8. Raise the printing platform and remove the material tray. 9. Remove the printing platform. 10. Prepare for leveling by loosening the platform screws, allowing the platform to be in a loose state. 11. Please take a sheet of A4 white paper and place it flat on the printing screen. 12. Lower the platform axis. 13. Install the platform. 14. Hold the platform firmly in place and tighten the diagonal locking screws. 15. Pull out the paper with a uniform resistance for optimal results. 16. Raise the platform and install the material tray. 17. Pour in the resin you want to print with. 18. Insert the USB drive and select the pre-sliced file. 19. Optional file parameters or onboard parameters.
