Guest
Skip Intro 0:54 Digitizer Replacement 3:49 LCD Replacement 7:52 or 10:30 Charger/Headphone Socket, Speaker & LED Flash 8:55 Assembly 12:33 To replace a damaged LCD (AMOLED) or Touch screen (Digitizer) you'll need: A T6 Torx star type screwdriver. (search for torx on Maplin or Amazon) A small bladed screwdriver, plastic knife and maybe some tweezers to grab the screws. If you need to replace the touch screen (digitizer) I recommend you get one that comes already in a frame. If you get one without the frame, you'll need to carefully remove the damaged screen and then glue the new one back in. I found the middle 'MENU' button didn't work after doing this. If pressing the 'menu' key brings up the 'Unlock' icon while the screen lock is active you know the buttons working OK. After connecting to Ovi Suite it was working fine again. If you still have trouble, try updating or re-installing the firmware using Ovi Suite. The same thing happens after repairing the Nokia N8 For solutions to most technical problems try Parts are very easy to find online. DIY repairs will void any warranty. Please rate&sub and I'll do my best to put some more on here... Filmed with a Panasonic HDC-SD700
