Guest
Pattern here : Facebook Group (Free Patterns occasionally) : Support me on Patreon : In the pattern you will find Wings and Tail “attachment hole marker“ if you want to attach them on other leather project. There is only one size for the harness pieces, but I put them centered in every page of the pattern, so that you can print them in personalized scale. With all the hole for attaching the the D ring/strap I put in the pieces, you can let loose your creativity on how the strap bound around the body. All the pieces in the video are cut from 1 mm thick latigo leather. You will need : Less then 100x100 cm of leather for all the pieces, recommended 1 to 2 mm thick leather, the tail must be of 1 mm leather. 7 and 11 mm rivet (better double headed rivet) 20 mm buckle 4 mm aluminium filament for the wings : A tube for the tail : Tool needed : Cutter - hammer - 1 or 1,5 mm hole punch for the stitch hole, 3 mm round hole for the rivet, needle and 1 mm waxed thread. Here is the press I use in the video : In the same site you will find all the rivet/buckle/button/snap-hook/chain I use in all my video, and the punch needed for the press. Get the same leather I use here :
