Guest
Оригинал видео: Все права на это видео принадлежат автору канала: In this video i turn a stainless bolt into a mini machete. Timestamps: 0:05 – removing the thread of the stainless bolt 0:15 – forging the stainless bolt into a plate 0:54 – marking the shape of the machete on the plate 1:09 – bringing the machete roughly in shape with the angle grinder 1:30 – grinding the first side of the machete clean on the belt grinder 1:44 – roughly grinding down the thikness of the machete with the angle grinder 1:59 – taping the machete with carpet adhesive tape on the support plate 2:24 – grinding the second side of the machete clean on the belt grinder with support plate 2:42 – finishing the outside shape of the machete withe different file 2:58 – drilling two holes in the blade for the handle 3:28 – cutting off two pieces of brass for the handles with the angle grinder 3:50 – taping the brass pieces on the machete and drill them together 5:09 – bringing the brass handles roughly in shape with the angle grinder 5:46 – glueing the two handles, the two stainless rivets and the machete together 7:07 – bringing the handles in shape with the grinding wheel, belt grinder and file 8:10 – sharpen the knife roughly with the belt grinder 8:23 – polishing the knife 8:55 – sharpen the blade with a grinding stone 9:04 – final cutting test 9:13 – showing off the final product, also in comparison with the stainless bolt Subscribe for more of my content. I’m uploading videos about mechanical stuff, as new creations and buildings and also restorations. Thank you for watching :-) My Patreon Page:
