How To Make Amazing Stable RC Plane With Handmade RC. Long Flight Time

How to make a model airplane. Materiels Stryfoam and Foamboard. It is a complete trainer model with long flight time, stable flight, short take-off distance. Necessary Materials: 2212 980 Brushless Motor: 9x6 propellers: 30A Brushless ESC: OR LiPo Battery 2200mAh: D57mm wheel (2 pcs): D30mm Wheel: Control horns (4 pcs): Micro servos (4 pcs): Gold Connectors : Wheel stopper: Y extension cable: Adjustable Linkage stopper (Easy Link): Pushrods: Canopy Hatch Lock : Fiber Strips Adhesive Tape (25mm): Fastener strip : Screws () : M3x30mm screws : 5mm Kraft Foamboard  (1 plate) 3mm insulation foam (1 plate) 6mm insulation foam (1 plate) Lipo Battery Charger: OR Hot melt Glue Gun: OR OR If you don't want to use handmade RC: 4 or 6 channel radio control system: OR OR Some of the shops that sell Kraft Foam Board: +9742012 Thanks for watching. If you want to support, join this channel. DIAGRAMS and DETAILS: Landing Gear 3D File: Making Handmade Radio Control Video: Technicial Specifications: Lenght: 73 cm ( inc) Wing span: 109 cm ( inc) Flight weight: About 675 gr Center of gravity: from the front of the wing Required control system: Min. 4 channels, 4 micro servos Suitable battery: 2200Mah (Max 2700maH) Suitable motor: 2212 Brushless Motor (980-1400KV) Suitable propeller: 2 Blade 9x6 (9060) Flight Time: Approximately 30 minutes for an average gas level of 38% Wing area: 1976 cm2 Vbar: My Web Site (KendinYap): All of my videos : Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos. #rcairplanes #modelairplane