3D Printed 6-Bay NAS case - Improved in every way!

This project is a follow up for my previous video where I shared a 4-bay NAS / APU case. After tons of feedback I decided to give it another go and create this new and improved version! Check out the files and become a member of my Printables Club here: Detailed printing instructions/recommendations with explanations and pictures can be found on Printables, by checking out the link above. ** Materials/components required to build this case: 31x M3 threaded inserts: 31x M3x10mm machine screws: 8x 8x3mm Neodymium magnets: 1x PC Screw kit (for standoffs HDD mounts): 1x Extra M3 screw for the PCIe card (optional) **PC Components that this case can fit: Mini ITX Motherboard: Or a NAS Motherboard (ITX form factor): SFX or SFX-L Power supply: Single slot PCIe expansion card: 2x Slim 92mm PC fans (up to 22mm thick): 3.5“ HDDs (Up to 6x): 2.5“ SSDs (Up to 3x): SATA power and SATA cables with 90 degree connectors (due to limited clearance): All of the links above are just to guide you in the right direction, you are responsible for doing your own research into what parts you should use to fulfill your own needs, all links are also “affiliate links“, meaning I may earn a small commission for every qualified purchase at no extra cost to you.