Simple DIY Hoist Ladder Lift with 3 Pulleys for Heavy Cardboard Boxes.

You make this in less than an hour. Ideal if you need to store heavy boxes on high shelves. You need: • 3x Pulleys for cord size 8mm • 3x jubilee clips (to attach 2 pulleys to the rungs and 1 pulley to the board bracket) • 15m rope diameter 8mm • A ~20mm plywood board (to cut 2/3 and 1/3) • 2x “L-shaped“ brackets to hold the bottom plank at 90 degrees angle • 1x “flat“ bracket to screw in the middle top part of the lift to attach one of the pulleys onto it • Approx 14 wood screws 20mm long • A bit of washing up liquid to reduce the friction of the plank against the ladder. Also Cut out 2 wood guides out of your board that you will attach behind the lift board to keep it from sliding out of the ladder - fix them ~5mm wider than the ladder to allow a bit of movement left or right. #DIY #hoist #ladder #lift