Installation Guide for ST3515 3.5 SATA Tray-less Hdd Mobile Rack

Step-by-Step Installation: 1. Prepare the Hard Drive: Ensure your 3.5“ SATA hard drive is ready for installation. If you have any important data on the drive, make sure it is backed up before proceeding. 2. Open the Enclosure: Open the front panel or door of the enclosure. 3. Insert the Hard Drive: Align the SATA connectors of the hard drive with the corresponding connectors inside the enclosure. 4. Close the Enclosure: Once the hard drive is properly seated, close the front panel or door of the enclosure. 5. Install the Enclosure into the “ optical Drive Bay: Remove the front panel of the optical drive bay Slide the ST3515 enclosure into the bay until it is flush with the front of the computer case, secure the enclosure with screws 6. Connect Power and Data Cables: Connect a SATA power cable from your power supply to the power connector on the back of the enclosure. Connect a SATA data cable from your motherboard to the data conne