Guest
Данный дизайн является интеллектуальной собственности автора. Если хотите его использовать, получите разрешение от автора. В противном случае автор подаст на вас в суд. This design is the intellectual property of the author. If you want to use it, get permission from the author. Otherwise, the author will sue you. Hello everyone, my name is Konstantin Smirnov, I am an entrepreneur and inventor. I want to present to your attention my design for a full-suspension bike. It all started with the fact that I liked full suspension bikes. But I saw a lot of flaws in their design. Firstly backlash. Imagine our bike, its length is about one and a half meters. The front and rear triangles are connected with thin links 10mm or 20mm in diameter. Naturally, such a design will play and there will be no hard. To remove the backlash, you need to put links at least 50mm in diameter, and preferably more. The design will be even larger and heavier, as a result, no one does this and full suspensions have a backlash. In my design, I removed the levers. This made it possible to make the design more compact, and the shock absorber less loaded. You see how short the rear triangle is. This is due to the fact that the rear wheel does not move back and forth. The suspension works up and down. The next huge plus is that during the operation of the suspension, the chain does not sag, but stretches, respectively, there is less chance that it will fly off. I named my design Full Suspension Hardtail. Next, I show how the suspension works. Thank you all very much for watching. Subscribe to the channel, put likes. I'll try to post new stuff more often
