Guest
🎯 Загружено автоматически через бота: 🛑 Оригинал: 📺 my mechanics insights — @mymechanicsinsights 📃 Оригинальное описание: In this video I’m showing how to I removed the side marker holes in the fender of my Datsun 240Z. First I made the shape of the cutout easier by rounding the ends. Then I removed all the paint around the opening for clean welding. I preshaped a piece of sheet metal of the same thickness as the fender to match the curved shape of it. Once I had it I cut it to shape to fit inside the opening. I held the patch in place with the help of a few magnets. Then I slowely startet to weld it in, always made sure it sits fush before welding one spot. To keep the heat to a minimum I always cooled the weld with compressed air. I also followed a cross pattern to weld it in to reduce the heat and warping. Then I snaded the welds down and stretched it with hammer and dolly. To reshape the warped fender with hammer and dolly I sanded the welds down completely flush on both sides. After a rough shaping it was time to apply a guide coat with black matte paint. Then I sanded it with a flexible file that had a 240 grit emery cloth taped to it. I hammered and sanded back and forth until the shape of the fender was absolutely perfect. I hope you like my work and enjoy the video. Huge thank you to all of my Patreon supporters and especially to: Adel AlSaffar AK Alfonso Baz Alistair Moor Amar.k Arron Metcalf Ben Burns Ben Sigelman Bike Kefeli Brenna Redpath Bryan Knauer Chris Walter Dane Prince Daniel Shaw David Barker David Lehnus Edward Conway Haitham Al Zir Harrison Angsten James John Shebanow Joseph Kamps Josh Ledford Josh Wasserman Joshua Bentley Joshua Scher Kar Kerem Yollu Lambda GPU Workstations Marcus H. Mark Tesmer Mellissa Marcus Nathaniel Jack nick arello NoLoneSurvivor Pat Thrasher Peter Cyprian Peter Riddett potokslow Ryan Pickett Scott Tomlin Stephen Buggy StevenVR Tyler Carruth VaushVidya Vickie Bligh Vince Valenti Will Black Yale Baker Yuri Zapuchlak Aaron Funk Adam Holtzclaw Alipasha Sadri Andre Andrew Lavergne Andrew Phillips Antal Arni Bjorgvinsson Bobcat Johnson Bonnie Williamson Brett Pitts Brian Hoerl Bruce Bosckek Caleb Betczynski Chad Bryant charader Christian Fjelldal Crystal Cash Damien Fuller-Sutherland Daniel Trejo Daniel Varga Dave Hardware David Chang-Yen David P Hruska David Powell Dustin Davis Dylan LikeBobDylan Erik Nordby Grant Daniel Haley McFadden Hard_Boiled Jack Curry Jacob Hamm James Berwind Javiera Ignacia Jeldes Pizarro Jaxon Gray Jeremy Cole Johan Vergeer Joël Franusic Justin Blackwood Jörg Thomsen Ken Rosso Kevin Rechsteiner Kurt Gazow Leon Fox Marc Cerisier Mary Casella Mellissa McConnell Micah Reid Michael Lamp Michael Masouras Nemo Peter Read pk42069 repülő búgás Robert T McCune Scott Marshall Stefan Kronander Svenja Kuckla Taylor H Thanny Tim Holt Tom Wallace Torben Arneberg Jensen Trevor Kam Tucker Ifft William If you have any questions about the process, machines i’m using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible. Sorry for my bad english, it’s not my language. I try my best to improve my technical english. Subscribe for more of my content. I’m uploading videos about mechanical stuff, as new creations and buildings and also restorations. Thank you for watching :-) „I make a new one“ T-Shirts: My Main Channel: My Second Channel: My Patreon Page:
