Marvin Key Chain made on ToyREP. Printed of ABS filament with E3D clone, 0.4 mm nozzle. Printed on heatbed with glass and kapton tape. Whole print took 1hours and 41 minutes, used 1447mm of filament. Printed using Slic3er and Printrun . Settings: First layer 10mm/s, thick, 235°C, 200% extrusion width, concentric infill, 110°C heatbed. Other layers 12-16mm/s, thick, 225°C, 40% honeycomb infill, 110°C heatbed. Retraction at speed 4mm/s, extra length on re
Hide player controls
Hide resume playing