How To Install Dynojet's Can-Am Maverick X3 Turbo Fuel Pump Module

Tap into smoother engine performance on your Can-Am Maverick X3 Turbo with Dynojet's upgraded Fuel Pump Module. This fuel pump module is fully compatible with the stock fuel system, whether you’re running gasoline or ethanol and it features a 2-stage filtration system. It also increases the fuel pressure, going from 65psi stock to 78psi, which reduces injector duty cycle by roughly 10%. Get yours today: Tools we recommend: — Push Pin Pliers — Flathead screwdriver — Ratchet (or two) — Ratchet extension — Swivel joint socket — Torx 30 socket — 10mm socket 0:17 — Benefits of Dynojet's Fuel Pump Module 0:38 — Tools needed 1:18 — Removal of passenger side dash panel 2:32 — Loosening fuel pump bracket 3:21 — Disconnecting fuel pump's electrical connector and fuel line 4:34 — Removal of fuel pump 6:02 — Gasket placement on Dynojet's Fuel Pump Module 6:17 — Installation of Dynojet's Fuel Pump Module 8:09 — Reconnecting fuel pump