Making a through jig head for soft plastic swimbaits

This is a basic jig head mould with a little extra pin that can be removed to leave a little hole for a wire or monofilament trace. It can be used to take the trace from stinger hook or with addition of snap it can link two lures together. Two lures can be a bit messy aiming the cast but from experience they don't often tangle if the connection it long enough but most often i used these jig heads for adding stinger hooks on larger soft plastic baits for pike fishing. The mold was made from a 3d print and cast using heat resistant rtv silicone from Amazon . Amazon link The hooks are size 5/0 90 bent jig hooks also from Amazon link